100 Double Capped Rivets 9mm - Rivets only

Rivets are an essential hardware for leatherwork.

We have for sale 100 x 9mm stem and 9mm cap rivets ONLY (If you need the hand tool we also sell that here: )

Available in Silver, Gold and Antique Brass

HAND SETTING TOOL INSTRUCTIONS

When using a hand setting tool and anvil you will need to make sure you have a very solid table to work on.

This is to stop the anvil from bouncing and causing the rivet to set lopsided or making a mark in the leather.

You will then need a rubber hammer.

Place the leather onto the anvil making sure that the rivet is directly sitting in the centre of the anvil dome underneath.

Place the hand setting tool onto the top of the rivet head.

Keep it very straight and start to lightly hammer the rivet head. This should start to flatten the stem of the rivet.

Go slowly to start to make sure that the stem does not go lopsided.

Once you are happy it is flattening off straight continue hammer till the cap is sitting flush with the surface of the leather.

Test it with your fingernail to make sure that the cap is secure, re-hammer if necessary.

We have a How to video on our youtube channel that shows you how to set and close off a rivet.